Martti, developed for adverse weather conditions, is the first Finnish robot car to challenge snow and ice

Martti, the robot car developed by VTT Technical Research Centre of Finland, is the first automated car to have driven fully autonomously on a real snow-covered road. On top of that, it also succeeded in making a new speed record of 40 km/h on the Aurora E8 intelligent road in Muonio, probably setting a new unofficial world record as well. 

Click Image to Enlarge
Martti älytiellä edestä

Martti is a research vehicle developed on the chassis of Volkswagen Touareg. Like its counterpart Marilyn, it is equipped with cameras, antennas, sensors and laser scanners. The number and placement of sensors differs between the vehicles. For example, Martti has three laser scanners sensing the environment only in front of the car, whereas its spouse Marilyn has two scanners looking forwards and one looking backwards.

- When in spring 2017 we, the researchers, taught the automated car Marilyn to drive, this autumn it has been teaching us on how to make Martti such that it can get along with its spouse, and follow GPS and positioning information on its route. Martti has been designed for demanding weather conditions and Marilyn shines as the queen of urban areas, says project manager Matti Kutila from VTT's RobotCar Crew, describing the couple.

On the intelligent road of Muonio, Martti was also given intensive training.

- It clearly has a very determined mindset, and after a persistent 24-hour training session, it started functioning. Earlier, Marilyn required a lot more work, because its control software was created from scratch. Martti uses the same software, which did no longer require more than minor adjustments, says Ari Virtanen, who was in charge of building the car and its equipment.
Martti made its speed record, when it was allowed to pick up speed after having felt its way for a little while.

- It probably also made a new world record in fully automated driving, making 40 km/h in a snowfall on snow-covered terrain without lane markings. It could have had even more speed, but in test driving it is programmed not to exceed the limit of 40 km/h, Kutila points out. The amazing drive was implemented by Pasi Pyykönen, Ari Virtanen and Rainer Täppinen.

Marilyn on call

The next step for VTT's autonomous cars will be changing the wavelengths of the optical components, increasing the resolution of the radar, and building more intelligence in the software monitoring the capabilities of the sensors. These are intended to enhance the vehicle's functioning capacity step by step also on slippery road surfaces, where concealed edge of the road or fog may obstruct visibility.

Different scenarios are added all the time in the development of the autonomous cars (such as cities, main roads, snow, exit ramps) that the car can manage, while increasing the driving speed and managing even demanding weather conditions with intelligence. 
Next, Martti will spend a well-deserved Christmas holiday, but Marilyn will be on call between Christmas and New Year, preparing for its first mission abroad, a trip to Germany in May. Before mid-January, Martti will be equipped with communications modules which allow it to communicate with digital transport infrastructure. So far it has been able to communicate with its spouse Marilyn only.

VTT's automated cars are intensely involved in the development of the 5G system, taking advantage of the opportunities it provides for automated driving through, for example, the 5G-SAFE project, which is part of Tekes' Challenge Finland programme. VTT works in close collaboration with the European automotive industry in the development of automation for demanding weather conditions.
- We already have at our disposal an intelligent roadside unit, capable of feeding local information for the insatiable needs of Martti and Marilyn. This cart dubbed MARSU contains measuring devices for friction data and a communications module serving as a base station. Furthermore, next spring one of our vehicles can also be spotted in forest environments, when Marilyn and Martti get a new friend capable of tackling all terrains, Kutila reveals.    

The Aurora E9 experiments have been conducted as a part of the Artic Challenge-CAD project as a joint work between Indagon, InfoTripla and Dynniq.

www.vtt.com

R&D | 18.12.2017

Latest articles

Research report: Predictive Maintenance 4.0

A growing number of companies want to use big data analytics in their predictive maintenance and are also investing in the resources needed for this. Of the companies already using this technology, no less than 95 percent say that they have already achieved concrete results. This is the conclusion of a follow-up study conducted by PwC and Mainnovation among 268 companies in the Netherlands, Germany and Belgium.

Asset Management | 17.1.2019

12 Helpful Tips for Doing IT Service Desk

Over the years, the evolution of technology and the adaptability of the people to it, has been increasing drastically. This process has brought about a boom in the service sector, making the IT subunit of it, the most successful.

Cmms | 27.12.2018

It’s About “Time”

At Bentley Systems, we have been talking to our users, especially owners, and it has become clear that despite our collective best efforts, there is a gap in the market.  Owners need easy access to real-time, accurate, engineering information and they need tools that make it simple to keep engineering data up-to-date, especially those engaged in brownfield and revamp projects.  It takes too much time and effort to gather and verify the information they need to make decisions effectively. And for older plants that do not have 3D models, there is simply no visual way to verify and check information easily.

Partner Articles | 10.12.2018

How to Choose an Air Compressor, According to Science

Buying an air compressor, for the first time, can be challenging in many ways. There is a lot going on behind this power tool that offers faster and more efficient performance. Before we get to know about the details of an air compressor then, let’s understand how it works. How do air compressors work?

Applications | 10.12.2018

8 Ways to Identify and Eliminate Noise Hazards in the Workplace

Occupational noise hazards are one of the most common workplace safety concerns. Our hearing is sensitive and it does not take much to temporarily impair or permanently damage it. 

HSE | 10.12.2018

Bacterial Bandages, Natural Dyes and Recycled Fibres: Aalto Brings Materials Revolution to Slush

New materials play an important role in sustainable development and combatting climate change. New uses for old materials can also be a major industrial opportunity: for example, the value of biomass from forests in Finland can be doubled if used for manufacturing products of higher added value.

R&D | 4.12.2018

Maintenance: A Necessary and Important Function in the Future

Euromaintenance 2016 will take place in Athens at the end of May. It is the ideal moment to reflect on maintenance in a European context. Euromaintenance is known as the summit for all involved in maintenance across Europe, it’s the place to be. The conference, with the support of the EFNMS, is the only commercially independent conference covering the topics we deal with in the maintenance world.

EFNMS | 20.5.2016