Highly Fire Retardant Coating from Biomaterials Developed by Finland's VTT

A spray- or brush-applied fire retardant coating made from nanocellulose is well suited for improving the fire properties of wood-based materials. It reduces the access of oxygen to the surface, thus significantly inhibiting combustion. Finland's VTT has found an effective production method for the coating through piloting and is currently seeking a partner to commercialise the technology.

fire_retardent

HefCel-coated wood (left) and untreated wood (right) after 30 seconds flame test. (Photo: VTT)

The fire retardant coating is based on HefCel technology (High-Consistency Enzymatic Fibrillation of Cellulose) developed and patented by VTT. HefCel technology enables the efficient and cost-effective production of nanocellulose from wood-based pulp. The solids content of HefCel materials is ten times the solids content achieved with traditional manufacturing methods. This makes them well suited for uses where low water content is preferred: for example, paints and coatings, packaging and composites.

Nanocellulose has a natural tendency to adhere to wood and to form an airtight film on the surface of the wood and various other small particles such as pigments. This makes nanocellulose-based coatings highly suitable for the protective treatment of wood surfaces. Combining HefCel nanocellulose with organic pigments forms a spray- or brush-applied, airtight film that prevents the access of oxygen through the coating and at the same time significantly inhibits combustion.

The idea was developed by VTT research scientists Vesa Kunnari and Jaakko Pere as part of the Design Driven Value Chains in the World of Cellulose (DWoC) project funded by Tekes (now Business Finland).

With its new piloting equipment VTT is now able to manufacture bigger HefCel batches. The research scientists were pleased with the quality of the first trial batch and the energy-efficiency of the production method.

- We have many more good ideas about how to simplify the process and make it even more efficient, says Senior Scientist Panu Lahtinen from VTT.

Exploring the potential to commercialise the technology has been funded by Business Finland and under VTT’s ‘New knowledge and business from research ideas’ funding programme. A project implemented under the funding programme studied, for example, the suitability of HefCel technology as a paint and coating industry raw material.

R&D | 24.4.2019

Latest articles

Wärtsilä software will enable a new Simulation Centre to meet needs of cruise, ferry and superyacht clients

The technology group Wärtsilä is to supply and configure the software solutions for a new, state-of-the-art, purpose built simulation centre.

R&D | 20.5.2019

Safe chemical storage is essential for safety, health and business prosperity

Many industries use and store dangerous chemicals, and the chemical waste produced. Storing these substances safely is essential to protect workers’ health, the environment, and the public from the effects of potential chemical spills and gas emissions. In this article the European Union information agency for occupational safety and health, EU-OSHA, gives tips on how to keep workers safe and healthy.

HSE | 16.5.2019

Safe and sustainable airport maintenance with tractors

Robotic vacuum cleaners and lawnmowers are already a reality, but can the same idea be applied to a 7-ton machine clearing an airstrip from snow? Valtra and Nokian Tyres partnered up with three other Finnish companies for a joint proof-of-concept project at the European Union’s northernmost airport. 

Applications | 15.5.2019

Maintenance Performance and its Measurements

Maintenance performance can be difficult to measure.  But, measurements drive behavior and it is therefore important to think through what to measure.  The measurement should be designed in order to achieve the following:

Asset Management | 25.4.2019

Implementing RCM? 5 Mistakes You Need to Avoid

If you are considering to employ  RCM analysis  at your facility, it means you have recognized the need for a change in your maintenance strategies. Reliability-centered maintenance is an excellent way to keep your plant or machinery up and running by helping you choose the optimal maintenance strategy for all of your important assets. 

Cmms | 19.3.2019

Save Energy in Steam and Condensate Systems

The oldest paper mill still operating in Germany detects defective steam traps with digital ultrasonic testing technology

Partner Articles | 15.3.2019

Time to Invest in Europe’s Water Infrastructure

THE WATER AND SANITATION sector is an important part of the European economy. It represents more than 500,000 people directly employed in water and sewerage companies, operating thousands of facilities and several million kilometres of networks.

Editorial | 14.3.2019

Maintenance: A Necessary and Important Function in the Future

Euromaintenance 2016 will take place in Athens at the end of May. It is the ideal moment to reflect on maintenance in a European context. Euromaintenance is known as the summit for all involved in maintenance across Europe, it’s the place to be. The conference, with the support of the EFNMS, is the only commercially independent conference covering the topics we deal with in the maintenance world.

EFNMS | 20.5.2016