IDCON Provides Reliability & Maintenance Training at SCGP Excellence Training Center in Thailand

IDCON INC, a global reliability and maintenance consulting firm headquartered in the United States provided Reliability and Maintenance training for SCGP’s Excellence Center in Thailand July 16 to 20, 2018.   

training1 (1)

This is the second time IDCON has provided training in the key areas of Reliability and Maintenance Improvements to the SCG team.  “We are so pleased to be able to return to Thailand to assist the SCG team with this valuable training.” stated Owe Forsberg, Senior Consultant with IDCON. 

IDCON proved three training courses at MIDA GRANDE HOTEL - DHAVARAVATI, NAKHON PATHOM.  Fifty-five professionals attended courses that included Work Management Planning and Scheduling, Shutdown Turnaround Optimization Program and Maintenance Cost Control and Asset Management.   The instructor for the program was IDCON Senior Consultant Ryan Farr.

For more information about IDCON’s Reliability and Maintenance Training courses it is suggested to contact IDCON directly at +1 919-847-8764

About IDCON INC

IDCON, INC is a highly specialized management consultant firm working within the industry to maximize productivity through improvement in maintenance and operations practices. They support clients worldwide with strategic partnerships in Europe, Scandinavia, Australia, and Asia.

www.idcon.com

 

Events | 25.7.2018

Latest articles

Neste, ReNew ELP and Licella to collaborate in utilization of waste plastic as a raw material

Neste, the world’s leading producer of renewable diesel, UK-based chemical recycling company ReNew ELP, and Australian technology developer Licella are joining forces in a development project to explore the potential of using mixed waste plastic as a raw material for fuels, chemicals, and new plastics. The companies are also collaborating with the aim to facilitate regulatory acceptance for chemical recycling. 

HSE | 16.8.2018

Bearing solution saves over 130,000 euros at energy plant

When a UK-based electricity producer was experiencing frequent breakdowns due to bearing failures in two industrial fan units, the plant requested the services of NSK to propose and implement a suitable solution. After performing an application review as part of NSK’s AIP (Added Value Programme), a change of bearing and fixing arrangement led to significant cost savings.

Asset Management | 16.8.2018

Wärtsilä Ballast Water Management Systems successfully tested for global compliance

Technology group Wärtsilä has announced that its Aquarius UV Ballast Water Management System (BWMS) has successfully completed all testing procedures required for United States Coastguard (USCG) type approval compliance. The documentation for full USCG type approval is being finalised for submission and awaits only final input from DNV-GL, the USCG approved independent laboratory.

Applications | 25.7.2018

Bilfinger relies on Comos software from Siemens for group‑wide digitalization

Siemens and industrial service provider Bilfinger SE have decided to step up their cooperative association, as Bilfinger drives forward digitalization using the Comos Engineering & Maintenance Platform across its many sites and subsidiaries spread around the globe. This software platform from the Siemens Digital Enterprise portfolio not only allows close cooperation between the different Bilfinger sites and its customers through the use of a shared database, but also offers sufficient flexibility to accommodate individual project requirements.

Cmms | 18.6.2018

How to Safely Align Wind Turbines

Safety engineers around the world can breathe easy. The PRUFTECHNIK ROTALIGN® and OPTALIGN® technology has made aligning machine shafts, especially gear shafts, much safer.

Partner Articles | 6.6.2018

Swedish Project Investigates Ways to Produce Fuel from Waste Tyres

The possibility of producing pyrolysis oil from worn out tyres is investigated in a research project run by RISE Research Institutes of Sweden together with Scandinavian Enviro Systems and Ragn-Sells with support from Vinnova.

R&D | 6.6.2018

Maintenance: A Necessary and Important Function in the Future

Euromaintenance 2016 will take place in Athens at the end of May. It is the ideal moment to reflect on maintenance in a European context. Euromaintenance is known as the summit for all involved in maintenance across Europe, it’s the place to be. The conference, with the support of the EFNMS, is the only commercially independent conference covering the topics we deal with in the maintenance world.

EFNMS | 20.5.2016